水口料粉碎机

水口料粉碎机
成熟的物料回收管理方案
专门设计用于破碎回收塑料成型过程中产生的废品及浇口，水口。
▲需要破碎的材料通过喂料斗进给，根据破碎材料的不同，有多种的喂料斗可供选择。
▲根据使用的不同，低速在线粉碎机水口料粉碎机系列在选配装机的方式上也有多种选择，可选择配有送料风机的带回收系统的立即回收方式，也可选择配有抽吸槽及装袋接口的使用方式，多样化的搭配方式使得生产的低速破碎机系列具有非常广泛的用途，为客户解决不同的在线破碎方案。
水口料粉碎机集合了一般低速破碎的共同优点，如噪音低、粉尘少之外，在其设计上还有更加出色的性能，如专门为破碎废品和浇口而设计的刀具、转子，快捷的拆机方式，体现了水口料粉碎机的人性化。机器采用减速机传动方式，增加了扭矩，机器可以随时启动，即使有破碎材料残留在破碎腔中，也可以轻松启动机器。
                 
水口料粉碎机机边回收破碎机**的结构设计
分拆式开放机体，便于粉碎室的清理。
片形错刀式结构，分散切削负荷。
免调刀架设计，更换维护更为简便。
超静音、全封闭双层隔音机身设计，有效改善车间噪间干扰的困扰。
转速低、大扭矩、粉尘少、不锈钢料斗易于清洁、坚固耐用、操作简便等优点。
高强度、长寿命刀具，更适用于粉碎含纤材质之胶料。 
            
水口料粉碎机边回收破碎机应用范围
机边粉碎机应用于手工或机械手给料粉碎，配合塑料成型机边取出机做水口粉碎及废料立即回收，或搭配皮带输送机将机边水
   口料粉碎使用。
             
粉碎机机边回收破碎机**的电气配置
带有开启、停止、紧急停止按钮及主电源控制开关，马达过载保护，进料仓回收仓配备**防护开关。
慢速机边回收破碎机工作原理图：    
  水口料粉碎机机边回收破碎机 还可以选择其他功能
旋风集尘器：有效分离粉碎与粉尘，便于原料的有效利用。
粉尘收集袋：方便清理、减少污染。
送料风机装置：可实现自动上料、提高利用效率。
满料报警装置：当料仓的粉碎达到设定的满料位置时，机器自动停止工作并报警告知用户。
特殊化筛网孔径：Φ4，Φ8，Φ10，Φ12，用户可根据实际需要选配。
新次料比例阀：可根据生产需要调整新次料的混合比例。

磁铁吸附：可有效阻止由入料口进入粉碎室内部的各种铁质杂物，防范金属物对机器造成的损坏。

Mouth material crusher
Mature material recovery management program
Specially designed for crushing and recycling of plastic produced during the process of waste and gate, outlet.
▲ need to break the material through the feed hopper feed, according to the different broken materials, a variety of feeding hopper to choose from.
▲ Depending on the use, the low-speed on-line pulverizer series of shredders is also available in a variety of options, and can be equipped with a recycling system with a feeding fan, or a suction tank And the use of bagging interface, a variety of ways to make the production of low-speed crusher series has a very wide range of uses for customers to solve different online crushing program.
The Mouth Shredder combines the common advantages of low speed crushing, such as low noise, less dust, and better performance in its design, such as knives, rotors, and cranes specially designed for crushing waste and gates Disassemble the way, reflects the humidification of the nozzle material. The machine uses the reducer drive mode, increases the torque, the machine may start at any time, even if there is broken material in the crushing chamber, you can also easily start the machine.
                 
The perfect structural design of the crusher of the machine
Split open body, easy to clean up the crushing chamber.
Chip - type die - cutting structure, distributed cutting load.
Free to adjust the knife design, replacement maintenance is more simple.
Ultra-quiet, fully enclosed double-layer sound insulation body design, effectively improve the workshop noise interference.
Low speed, high torque, less dust, stainless steel hopper easy to clean, durable, easy to operate and so on.
High strength, long life tool, more suitable for crushing the material containing fiber material.
            
Application range of reclaimer crusher
Machine edge crusher used in manual or mechanical hand to the material crushed, with the plastic molding machine edge to take the machine to do the mouth of the shredded and waste recycling immediately, or with the belt conveyor will machine edge water
   Ingredients are crushed.
             
Mouthpiece Crusher Machine Side Recycling Crusher Safe Electrical Configuration
With open, stop, emergency stop button and main power control switch, motor overload protection, feed bin recycling compartment with safety protection switch.
Slow machine edge recovery crusher working principle diagram:
  Shaping material crusher machine side recovery crusher can also choose other functions
Cyclone dust collector: effective separation of crushing and dust, easy to use the effective use of raw materials.
Dust collection bag: easy to clean up and reduce pollution.
Feeding fan device: can achieve automatic feeding, improve the efficiency.
Full alarm device: When the silo crushed to set the full material position, the machine automatically stops working and alarm to inform the user.
Specialized screen aperture: Φ4, Φ8, Φ10, Φ12, the user can be selected according to actual needs.
New material ratio valve: According to the production needs to adjust the mixing ratio of the new material.
Magnet adsorption: can effectively prevent the inlet from entering the crushing chamber inside a variety of iron debris, to prevent metal damage to the machine.