Tire wire separator

轮胎拉丝机器,Tire wire separator

Tire wire separator一：型号：YULJ-1200（轮胎双头拉出机Pull the tire double machine）

机器组成部件：主机体2件，Machine component parts: the main body 2

二：液压站1件，Hydraulic station 1 PCS。

三：升降台1件， lifting platform  1PCS。

四：曲型斜体9.2米输送带1件，Italics 9.2 m curved conveyor 1 PCS。

五：自动剪台1件（用作将轮胎剪断，然后拉丝，拉丝后断丝很小），

Automatic cut sets a (used tires cut, then drawing after drawing a small broken wire

抽出的钢丝输送带长6米1件，Drawn steel wire conveyor length 6 m 1

六：拉力：25吨（内部压力为10MPa时）Pull: 25 tons (when the internal pressure of 10MPa)

七：*大内部压力：15MPa    Maximum internal pressure: 15MPa

八：机器总功率：9.2米输送带2.2kw，6米PVC输送带1.5kw，振动电机1.5kw,液压站37.11kw,12米输送带2.2kw（可以不配置价格减RMB：8万）,剪台12.5kw，共57kw。

Total power: 9.2 m conveyor 2.2kw, 6 米 PVC conveyor 1.5kw, vibration motor 1.5kw, hydraulic station 37.11kw, 12 米 conveyor 2.2kw (can not configure Price Less RMB: 8 million) and shear station 12.5 kw, a total of 57kw.

九：冷却系统：风冷    Cooling System: Air Cooled

处理轮胎范围：ø800-ø1200mm（*大1400MM）

Handling tire range: ø800-ø1200mm (maximum 1400MM)

十：处理能力：50-60个/小时，Processing capacity :50-60 / hour

十一：操作方式：可自动或手动按钮式操控

Mode of operation: automatic or manual push-button contro

十二：机器总重量：约15吨。Total weight: about 15 tons

十三：液压件：油泵国产永灵，阀件台湾，油管国产Hydraulic parts: pump domestic Yong Ling, Taiwan valves, tubing domestic

十四：电器：西门子+欧姆龙+国内品牌，PLC三凌

Appliances: Siemens + + domestic brands Omron, PLC Mitsubishi

电机：西门子Motor: Siemens

减速箱：SEW     Gearbox: SEW

十五：交货期：70-80天左右。Delivery :70-80 days

十六：付款方式：先预付50%订金，后付50%货款出货前付清，然后到厂验收装货柜。Payment: prepay 50% deposit, 50% payment after payment before shipment paid, and then to the factory acceptance loaded containers.

P十八：货柜要求2个40尺高柜装运，Container requires two 40-foot shipping container注：以上价格含小量配件，其它安装。Note: The above prices include small parts, other installation.

Tire wire separatort轮胎拉丝机设备技术参数Tire drawing machine equipment technical parameters

设备性能如下：Equipment performance as follows:

一、处理轮胎范围：直径800~1200mm。A deal with tire range: 800 ~ 1200mm

（1）拉丝处理产量：约50~60个/小时，Brushed Yield: about 50 ~ 60PCS / hour

（2）冷却系统：风冷（AH1012 两台）Cooling System: Air Cooled (AH1012 )  two  。

（3）三相电电源 （以上电压和频率需要根据你们的要求自行核实）Three-phase power supply (over voltage and frequency according to your needs to verify their own requirements)

一、 设备技术参数：Equipment technical parameters:

1、 剪台输送机（M09208）：Shear conveyor (M09208)

1） 驱动方式：链传动方式Drive mode: Chain Transmission

2） 机长：L＝3.45m，Captain: L = 3.45m

3） 带速：V＝  _ 13   m/min，Belt speed: V = _ 13 m / min

4） 输送物料：轮胎（直径≤φ1200mm）Transportation of materials: tires (diameter ≤ φ1200mm)

5） 输送量：60个/小时，Throughput: 60 / hour

6） 电机减速机型号：    SK32100ADB     Motor reducer Model: SK32100ADB   

7） 减速机厂家：  德国广州公司（诺德）        Reducer manufacturers: Germany Guangzhou (NORD)

2、自动剪台（M09209）：Automatic cutting station (M09209):

1）压力：25吨（内部压力为10MPa时），Pressure: 25 tons (when the internal pressure of 10MPa).

      2）油泵型号及生产厂家：    浙江     The pump manufacturer and model: Zhejiang

3）阀门生产厂家：台湾，  Valve manufacturer: Taiwan

4）3、曲型斜体9.2米输送机（M09210）：Italics 9.2 m curved conveyor (M09210):

1）带速：V＝ 10.6      m/min   Belt speed: V = 10.6 m / min

2）输送物料：轮胎（直径≤φ1200mm）Transportation of materials: tires (diameter ≤ φ1200mm)

3）输送量：60个/小时，Throughput: 60 / hour

4）电机减速机型号：    SK32100      Motor reducer Model: SK32100    

5）减速机厂家：  德国广州公司（诺德）          

4、 拉丝机（M09211）：Drawing Machine (M09211)

（1）单侧拉力：25吨（内部压力为10MPa时），设计*大内部压力：15Mpa。Unilateral force: 25 tons (internal pressure of 10MPa), the design maximum internal pressure: 15Mpa.

（2）拉钩的材质  45#  Retractors material 45 #

（3）V槽的材质  45#,V groove material 45 #

(4)油泵型号及生产厂家：国产永灵；Pump models and manufacturers: Domestic Yong Ling

(5)阀门生产厂家：台湾；Valve manufacturers: Taiwan

5、 Tire wire separator铁钢丝输送机（M09211）：Iron wire conveyor (M09211)

（1）带速：V＝   10.3   m/min，Belt speed: V = 10.3 m / min

（2）输送物料：轮胎（直径≤φ1200mm）Transportation of materials: tires (diameter ≤ φ1200mm)

8） （3)输送量：60个/小时，Throughput: 60 / hour

（4）电机减速机型号：SK32100ADB     Motor reducer Model: SK32100ADB

（5）减速机厂家：诺德。Reducer manufacturers: Nordisk

三、Tire wire separator电气参数：Electrical parameters

1、低压电气元件采用SIEMENS品牌,PLC采用三菱PLC进行控制。每个设备均具有启动信号，停止信号，急停信号，报警点，故障复位等**措施。SIEMENS brand low voltage electrical components, PLC Mitsubishi PLC control. Each device has a start signal, a stop signal, emergency stop signal, alarm, fault reset and other security measures.

2、电柜颜色为乳白色，每台机器独立一个电柜。Cabinet color is white, each machine independently an electrical cabinet